How to fix error code 0x800701b1 Windows 10/11 2022: Top Full Guide

How To Fix Error Code 0x800701b1 Windows 10/11 2022: Top Full Guide

Error code 0x800701b1 is a Windows error code that indicates a problem with the storage subsystem. This error can be caused by a variety of issues, including bad sectors on the hard drive, corrupted data on the hard drive, or a faulty hard drive controller.

In this article, Dreamcheeky will show you top effective ways to fix this error. Keep reading for more useful information.

What Is Error Code 0x800701B1 on Windows 10/11?

What Is Error Code 0x800701B1 on Windows 10/11

Windows 10/11 makes it easy to copy and paste files or folders from one drive to the other. However, Windows 10/11 users complain about the 0x800701B1 error when copying files or folders from one hard drive to another. This error can occur regardless of how large the data is being copied.

The error message is exactly as follows:

An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.

Error 0x800701B1: A device that does not exist was specified

Users are often faced with an error message when trying to copy and paste files or folders between locations. This is usually caused by a problem with.DLL files. There are many solutions to this problem. These solutions can solve the problem quickly.

Error 0X800701B1 is a Windows 10/11 error that indicates that the drive you’re trying to access is not available. This is usually when your computer cannot copy, paste or transfer data from the drive. It could be that your external HDD isn’t working correctly or that your computer doesn’t recognize it. This error can also occur when you try to install Windows 10/11 from an external hard drive (HDD), that’s plugged into a USB port.

This error could be caused by many factors, but the most common ones are faulty USB ports or drivers. We will discuss various ways to fix this error code in this article.

What Causes Error Code 0x800701B1 on Windows 10/11

What Causes Error Code 0x800701B1 on Windows 10/11

Users are often surprised when the error code 0x800701B1 appears suddenly. This error code can be thrown by many different reasons. The 0x800701B1 error could be caused by one of these things: An unspecified device.

Insufficient USB port – Depending on which type of HDD/SSD drive you have encountered this problem with, you might need to connect your external storage device to a USB 3.0 port rather than a 2.0 port to ensure the port has the necessary transfer speeds and power output.

Incompatible or inconsistent driver – Some users experienced this error code while using a generic driver to connect an external drive to their PC. You might be able to fix the problem by reinstalling your dedicated driver.

Insufficient PSU output – If your current PSU output is low and many computer peripherals are drawing power from it daily, it could be that your power source is not sufficient to power all of them. This issue can be fixed by either upgrading your PSU or removing non-essential peripherals.

Copying files is too difficult – If the files or folders you have copied are more than 4GB, this error can be a problem. This error message can be a problem when you are copying files to an SD card or USB flash drive.

Disk is protected by write – This can be either the destination disk is written-protected, or the drive is set for read-only. If this happens, the copying process will stop and you’ll get the 0x800701B1 error.

Too little space – Most destinations have very limited space and your data is large. The process won’t be successful if there isn’t enough space.

The file or target disk is corrupted – This could be caused by virus attacks. The data won’t be copied correctly if the disk is corrupted. Sometimes, encrypted files are used to transfer data. This can lead to unspecified errors when copying files or folders on the most recent operating systems.

System restrictions – There are rare cases where the system does not have any limitations that prevent files or folders from being copied correctly.

You are unable copy files or folders because of their ownership.

How to Fix Error Code 0x800701B1 on Windows 10/11

How to Fix Error Code 0x800701B1 on Windows 10/11

Plug the HDD/SSD into a different USB port.

Many users affected by the error code 0x800701b1 have been able to bypass it by connecting their affected drives to a USB 3.0 port rather than the 2.0 port. This will make it easier to fix problems caused by insufficient power or slow transfer speed. USB 3.0 has superior transfer speeds and can supply more power to connected devices.

Use your USB port to connect the HDD/SSD that is triggering this error code if it has one. After you’ve made the necessary changes, go back and try again to resolve the problem that caused the 0x800701b1 error. If you still have the same problem, continue to the next possible solution.

Perform a rescan of the disks.

Perform a rescan of the disks

This could be caused by a temporary glitch in the operating system. It can be fixed by running a Disk Management rescan. This is how to do it:

  • Right-click Windows to select Disk Management.
  • Expand the Action menu, and select Rescan Disks.
  • After the scan is completed, verify that the system has not been affected by the previous error. Restart the computer if the problem persists.

Reinstall device drivers.

Reinstall device drivers

Some users have reported that this problem could also be caused by driver inconsistencies. This problem usually occurs with SSDs and external HDDs. It is often caused by an incompatible generic driver. This problem can be fixed by using Device Manager to force the OS to install the compatible version for your SSD or external HDD.

These are the steps to follow:

  • To open a Run dialog box, press Windows key + R. Next, enter “devmgmt. msc” in the text box. Finally, press Enter to open Device Manager
  • Once in Device Manager, expand Disk Drives from the drop-down menu and right-click the drive that is triggering the error code. Click on Uninstall Device.
  • After confirming the removal of your drive driver’s file, wait for it to finish. This will remove the driver from your Windows and switch to the generic driver when you restart your computer.
  • Once the startup is completed, repeat the same action as before and check if the problem has been fixed.

You can choose to leave the generic driver, or download the specific driver from the manufacturer’s website and then install it. Outbyte Driver Updater is a simpler way to update your drivers. Outbyte Driver Updater scans your computer and updates, outdated drivers, in one click.

If the problem persists after reinstalling SSD/HHD driver, you can move on to the next possible fix.

Upgrading your PSU for desktop computers.

Upgrading your PSU for desktop computers

If none of these methods have worked, you may need to check your Power Supply Unit (PSU). This problem might occur on a desktop computer. Your PSU may not be able to supply enough power to meet the needs of all your components.

An SSD consumes around 3 watts while normal 3.5 HDDs consume around 10 watts. Your PSU may not be able to cover your SSD depending on what components you have, especially if your video card is very demanding.

You can disconnect any peripherals that are not necessary and check if the problem is resolved.

If the error code does not stop occurring when non-essential peripherals have been disconnected, then it is likely that your system has a PSU problem. In such cases, you should look for a PSU with over 500W (real power). Here are some tips to help you choose the right PSU for your system.

Take ownership of the problematic drive in the Security Settings.

If you don’t have the necessary security permissions to access the USB flash drive, the error message may be displayed as “The device doesn’t exist”. This situation may be resolved by taking control of the drive in the security settings. The Security tab might not appear for all users.

  • Right-click Windows to open File Explorer

Right-click Windows to open File Explorer

  • Select This PC in the left pane and then right-click the USB drive in right pane.
  • Next, select Properties and then go to the Security tab.
  • Click on the Advanced button at the bottom of your screen, and then click on Change in Front of Owner.
  • Next, click on the Advanced button at the bottom of the window. Click on Find Now.
  • Click on the “Change in Advanced Security Settings” button
  • Double-click now on the name of your user and click OK.
  • Next, tick the box to replace all child object permission entries with inheritable permission entries from this Object.
  • After the permissions have been applied, verify that the USB flash drive has not developed any issues.

Roll back the driver for the USB drive.

Roll back the driver for the USB drive

If the latest Windows driver for the USB flash drive is not compatible with it, the USB flash drive might display an error message that is not specific. This can be fixed by using an older driver to the USB flash drive.

  • Right-click Windows to choose Device Manager
  • Expand USB Serial Bus Controllers/Disk Drives now and right-click the USB drive.
  • Next, select Properties and then go to the Driver tab.
  • Note down the driver that is currently being used, and then click on the Update Driver button.
  • Next, select Browse My Computer to Find Drives and then open Let Me Choose from a List Of Available Drivers on my Computer.
  • Click on Next to select one of the drivers, but not the currently installed.
  • Click on Next to complete the driver installation.

Check if your USB flash drive is functioning properly. You can try each driver individually, as shown in step 6. Uncheck the Show Compatible Hardware option to see if the issue is resolved.

Perform a CHKDSK of the USB drive.

Perform a CHKDSK of the USB drive

If the USB flash drive is experiencing logical file system problems, the device may display the not specified error. If this happens, a Check Disk scan (CHKDSK), may be performed to resolve the problem.

Let the CHKDSK process run on the drive. This may take some time. After the CHKDSK scan is completed without any problems, you can check if there is no flash drive error.

If the problem persists, unplug your USB drive and turn off the system. Turn on your system and make sure you have the minimum settings. Then plug the USB back in to verify that the USB drive is working normally. If the problem persists, try another system with a different operating system.

Format the drive on that system, and then you can try it on your own system. If the issue persists, you can try a third-party application to fix it or have the USB drive checked for any hardware issues.

Create a new local user account.

Windows 10/11 can sometimes not read your local user account properly. This prevents you from accessing any data. To fix the problem, you might need to create a new user account.

This is a complete guide to what you should do.

  • Navigate to the Microsoft Management Console. Click the Start button and type mmc in the search box. Enter.
  • When asked to confirm, enter your administrator password.
  • Next, choose Local User and Groups.
  • Go to User > Action > Create a new user.
  • Fill in the details and click Create.
  • Once the local account has been created, close the dialog box.
  • Use your new account to plug in the USB or external drive.

Scan for malware.

Scan for malware

It might be a good idea to scan your computer for malware. You might be unable to drag and drop entire folders from your computer to an external drive if there are viruses, malware, rootkits or other types of threats.

To scan your computer, make sure to use an antivirus program that is trusted. To ensure that you get a legitimate program, download it from the manufacturer’s official website.

Once you have downloaded and installed the program, run a quick scan to ensure that it is working properly. After the scan is complete, you can decide whether to delete or quarantine any threats.

Change the destination format type.

You might have to transfer the file/folder from the source drive to an external drive/sdcard. You can resolve the problem by formatting it in NTFS format.

Important: Formatting your drive will permanently erase all files and folders. Make sure to back up any important files on the drive and keep it safe in another place.

  • To open the File Explorer, press Windows key+E Go to This PC in the File Explorer window to view all drives on your computer.
  • Right-click on the destination drive. To format the drive, click on Format.
  • Select NTFS (Default) under the File system option
  • To begin the formatting process, click on Start.
  • Click on Close after you have completed formatting.
  • Reboot your computer.

Try to move the file/folder after rebooting to the destination directory. This should resolve the problem.

Remove Read-only status from the destination driver.

This error can occur if you move a file or folder from one drive to another that is read-only. These steps will allow you to change the read-only status.

  1. To launch Run, press Windows key+R. Type cmd now and hit Ctrl+Shift+Enter.
  2. To allow the User Account Control, click on Yes. You will see the Command Prompt window with administrative rights.
  3. To execute each command, enter them one at a time in the Command Prompt window. Hit Enter to confirm.
  • diskpart
  • list volume
  • select volume X
  • attributes disk clear readonly

Replace “X” by the drive letter for your write-protected drive. To save your changes, restart your computer. After restarting your computer, transfer the files to the drive.

Create a NTFS format partition.

Create a NTFS format partition

You might also consider creating a new NTFS partition on your hard drive if you still have not found a solution to your problem.

Formatting or cleaning out the drive will permanently erase all files and folders. Make sure to back up any important files on the drive and keep it safe in another place.

1. To launch Run, press Windows key+R. Type cmd now and hit Ctrl+Shift+Enter.

2. To allow the User Account Control, click on Yes. You will see the Command Prompt window with administrative rights.

3. To execute each command, enter them one at a time in the Command Prompt window. Hit Enter to confirm.

  • Diskpart
  • list volume
  • select volume X
  • Clean
  • create partition primary

4. Replace “X” by the destination drive letter.

5. Select Disk 0.

6. To execute each command, simply type them one at a time and hit the Enter key after each one.

  • list disk
  • Select partition 1
  • Active

7. You can replace the “1” by the disk number of the destination drive to which you wish to move your files and folders. With the ‘list disk’ command, you will get a list of disks.

8. To format the destination drive using NTFS format and to label it with a name of choice, type this command and hit enter: format fs=ntfs label=Y

9. You can replace the “Y” with the label of your choice

10. Assign the new partition the drive letter you choose in the last step. You should make sure it is different from any existing drive letters.

11. The File Explorer allows you to view the current drive letters.

12. Copy-paste the following command into Command Prompt and hit Enter to execute it: assign letter=G

13. You can replace the “G” with the disk letter you choose.

14. Close the Command Prompt window. Reboot your computer now.

After rebooting, transfer the files/folders onto the newly created partition. There won’t be any errors in the transfer of the folder or file.

Remove other peripherals

Try disconnecting any other devices that are connected to your computer if this error occurs due to insufficient power. Plug them all in.

Disconnect all peripherals from a laptop and connect only the external HDD. To control your device, you can use your trackpad. You can check if the error has disappeared.

Update or reinstall your HDD drivers

Update or reinstall your HDD drivers

You can fix the error by updating your HDD drivers or reinstalling them.

  • Open the Device Manager.
  • Expand the number of Disk Drives.
  • Right-click the problem hard drive.
  • Select Update driver.
  • Wait for the update to complete and then restart your computer.
  • If the error persists click on the Uninstall Device option to uninstall the HDD driver.
  • To install a generic driver, restart your computer.
  • If the problem persists, check it out.

Keep your file transfer size low

When transferring files from or to your external HDD, keep them under 10GB. You should not transfer large files, especially if your computer is old and has low specs.

Use an Older Driver for the USB Flash Drive

Use an Older Driver for the USB Flash Drive

If the latest Windows driver for the USB flash drive is not compatible with it, the USB flash drive might display an error message that is not specific. This can be fixed by using an older driver to the USB flash drive.

  • Right-click Windows to choose Device Manager
  • Expand USB Serial Bus Controllers or Disk Drives and then right-click the USB drive.
  • Next, select Properties and then go to the Driver tab.
  • Note down the driver that is currently being used, and then click on the Update Driver button.
  • Next, select Browse My Computer to Find Drives and then open Let Me Choose from a List Of Available Drivers on my Computer.
  • Click on Next to select any driver (but not the currently installed).
  • Click on Next to complete the driver installation.
  • Check that the USB flash drive works properly.

You may also try the drivers individually, as shown in step 6. (You may uncheck Show Compatible Hardware to see if that option is checked).

Perform a Rescan of the Disks

Rescan disks in Disk Manager, which is a built-in utility on Windows PC that allows users to view and manage their installed hard drives, is another way to fix error 0x800701B1. All you need to do is:

  • Click the Start button, then select Disk Management from a pop-up menu.
  • Click Disk Management and click on the Action option. Select Rescan Disks from the pop-up menu.
  • Wait until the process is complete. Next, copy and paste the files again to your USB drive. You should continue to the next step if the error 0x800701B1 persists.

Check File System Errors

Windows has a built-in tool called CHKDSK that can check and repair file system errors. You can access it through Command Prompt. You will need to have some computer knowledge. If you make mistakes, Command Prompt could cause your computer to crash.

To run CHKDSK from Command Prompt, you can follow these steps.

  • To invoke the Run window, press Win + R.
  • Type cmd into the box, and then press Ctrl+ Shift + Enter. Command Prompt will be run as administrator.
  • Open Command Prompt and type the command chkdsk */f. Press Enter to scan the drive and fix any logical problems. When
  • typing commands, please replace * with your USB drive letter.

You can then wait for the process to end.

FAQs

FAQs about How To Fix Error Code 0x800701b1 Windows 10/11

1. What is the Error Code 0X800701B1?

The error code 0X800701B1 can be found on Windows 10 devices. This error code could be caused by corrupted files or missing system files, as well as a bad Windows 10 update.

2. What are the Possible Solutions to Fix This Error code?

This error code can be fixed with four possible options. These include repairing the system, running an SFC scan and resetting Windows 10. You can choose the one that best suits your needs.

3. How can I prevent this error code from happening again?

This error code can’t be prevented from happening again. You can however try the suggestions in this article to resolve the problem.

You can also keep your device up-to-date with the latest Windows updates in order to reduce the chance of this error happening to your computer.

Conclusion

Many Windows 10 users have been experiencing the error code 0X800701B1 lately. Fortunately, there are many solutions to this problem. Hope that our guide can help you fix the window problem. Thank you for reading.

 

 

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *