Summary: · For Vertical Blinds, first make sure all of your slats are properly aligned. Ensure that the ends are uniformly arranged and that the slats aren
Summary: · It’s very annoying when your lovely blinds vanes are misaligned and stuck. Many of our customer asks why their vertical blind won’t turn. There
Summary: · If everything looks normal, spray some lubricating spray (such as WD-40) where the twister rod is connected for rotating the blinds. Spray a
Summary: If the tilt control does not work, attempt to free the control by twisting the wand tilter clockwise while gently pulling the back cord of the ladder. The
Summary: · If you can draw the blind across the window but the louvres will not rotate, please follow these instructions: 1. Remove all the slats, with the
Summary: All Vertical Blinds · Attach One Touch Wand to Stem (English) · Fabric Falling Out of Channel Panel (English) · Louvers Will Not Traverse (English) · Adjust
Summary: · This can happen because the cord lock is jammed. Sometimes you need to gently keep tugging on it so that the lock could release itself. If this
Summary: · Grasp the plastic hanger of the mis-aligned slat between the thumb and index finger and twist in the direction it needs to move to align with
Summary: Sometimes, the blinds might not rotate because of friction between the vanes, stems, and carrier rod. If this is the case, a little lubrication will go a long
Summary: · Similarly, you may find that the louvres/slats on your vertical blinds won’t rotate. This is an indication that something is wrong with the ‘
Summary: · You need to use lubricant spray to fix the rotation problem. If your blinds won’t rotate because the rod is not rotating properly then it just
Summary: How to repair vertical blinds that will not close properly by adjusting … so the vertical vane (a.k.a., louver) attached to it doesn’t turn as it should
Summary: · B. After all the vanes are removed, take a look at the end of the blind which houses the tilting/turning controls. Rotate the control, all the