How To Paint Thermofoil Cabinets

How To Paint Thermofoil Cabinets

Dream Cheeky will help you know How To Fix Peeling Thermofoil Cabinets 2022: Best Guide

Video How To Fix Peeling Thermofoil Cabinets

A step-by-step tutorial on how to paint thermofoil cabinets to ensure the paint adheres!

How to paint thermofoil cabinets and make them last poster.

Today I’m headed to Haven Conference to spend time with all my blogging friends and hopefully come away with some really great information! I’m also there as Delta Faucet’s correspondent and I’ll be interviewing HGTV’s Brian Patrick Flynn as part of the gig! Although this post isn’t sponsored by Delta and really has nothing to do with the conference, it reminded me I never shared my tutorial for painting thermofoil cabinets. Now that it has been nearly eight months without any issues with the cabinets, I decided it was time to share how to paint thermofoil cabinets!A bathroom cabinet painted blue with a white countertop and a small blue an white vase.

If you have thermofoil cabinets and have ever contemplated painting them, you likely know this is a widely debated topic. But, this winter, I took the plunge and gave painting a try when I redid our powder bathroom. Today, I’m going to share with you how to paint thermofoil cabinets to make it last so you don’t have any peeling or chipping! This same process can be used on many other types like MDF cabinets, melamine cabinets, and more.

What Are Thermofoil Cabinets?

But first, a little backstory and info on thermofoil cabinets. With the exception of our master bathroom, all of the cabinets in our home are either thermofoil or melamine/laminate. Thermofoil cabinets have their advantages, including a flawless smooth finish and they’re easy to clean and wipe off. Thermofoil is essentially a thin layer of vinyl that is applied to MDF via an intense heat and pressure-bonding process. The end result is durable and super easy to clean. But because of that smooth finish and vinyl-like surface, it is widely known that they are extremely difficult to paint. Not only that, if you have a portion of the thermofoil that chips or peels, it’s nearly impossible to get the same look back on that section of the cabinet.

The Condition of our Thermofoil Cabinets

Here’s how our powder bathroom looked before the makeover. Definitely not horrible by any stretch of the imagination, but it wasn’t our style.

An off white bathroom with a brown mirror and speckled brown countertop.

Here’s a close-up of the thermofoil cabinets that were in our kitchen, mudroom and powder bathroom.

Close up of a white cabinet door with silver handles.

At first-glance, they appear white with some glazing. The reality is they are very cream and when there is an even remotely white item next to them, the coloring is very obvious, making them look peach, pink or yellow. It’s not an issue if you never use pure white in your decor, but in my house that wasn’t going to be an option.

I began my search as to whether or not you can paint thermofoil cabinets when we talked about renovating our kitchen.

Besides the fact that I didn’t love the color, one of the cabinet doors in our powder bath was peeling and we’ve also had issues with a few bubbling in our kitchen due to heat exposure. The bathroom cabinet was peeling when we bought the house, and I figured it was finally time to address it. With the makeover in the powder bath with Delta, it was the perfect time to address the cabinet situation.

So, let’s get onto the tutorial!

Supplies Needed to Paint Thermofoil Cabinets

There are a limited number of supplies your need in order to paint your thermofoil cabinets! But, each of the items listed below will help ensure you get the best and post durable finish possible on your thermofoil cabinets!

This post contains affiliate links for your shopping convenience. Click here to read my full disclosure policy.

  • Zinsser 1-2-3 Primer. I used this primer when painting the laminate cabinets on the island in our last home and it worked like a charm and works just as well with thermofoil cabinets!
  • A small plastic paint tray
  • A 4″ foam roller
  • A foam brush. I buy these in bulk and use them for virtually every paint project I do.
  • Painter’s tape if you need to tape off your walls and/or countertop next to the vanity.
  • A high quality paint brush. High-quality paint brushes make all the difference in getting a smooth finish! I used the Picasso Latex/Oil 2″ brush for the cabinets (I found this at the Benjamin Moore store) and a Purdy 1 1/2″ brush for the primer.
  • A sanding block. I used a medium grit block I already had on hand.
  • Benjamin Moore Advance Waterborne Interior Alkyd Paint. You can use any paint you want, but I was super happy with the finish on this one. It has excellent self-leveling, extended open time, and hardens more like an enamel. The finish is durable and beautiful!

A sanding block, paint tray, paint brush, foam roller, foam brush and Zinsser 1-2-3 primer on the floor ready to paint.

How to Prep Thermofoil Cabinets for Paint

First, I lightly sanded all of the cabinet doors, drawer fronts and vanity frame with sand paper. I paid special attention to the cabinet door that had peeled. This is a good example of the thin layer of thermofoil coating, and what the cabinet looks like below that layer.

Example of a peeling thermofoil cabinet.

I then wiped everything off with a paper towel to remove the dust before washing all the cabinet doors and drawer fronts with a mix of Dawn soap and water. This helped to ensure that any remaining grease and dirt on the cabinets was removed and so that paint would adhere properly.

After the cabinet doors were fully dried, I set up my painting station and got to work. I started by using the brush to get the primer in all the grooves and details of the cabinet. Then I used a fairly light handed and feathered stroke as I went along.

Thermafoil cabinet with the handle off and wiped down ready for painting.

I quickly followed that up by rolling primer, first into the inset, and then on the outer edges.

The door on the floor prepped for painting.

With the foam rollers, you can sometimes get air bubbles (shown below). I would just lightly roll over them again to pop them and ensure the surface flattened out.

Putting primer on the cabinet door.

I then repeated the same process in the bathroom on the vanity frame and stationary drawer front.

The cabinet doors removed from the bathroom cabinet.

The key to the entire process (both painting and priming) is to move fairly quickly. You don’t want either the primer or the paint to start drying while you’re still messing with it, or the strokes and roll marks will show up on the surface.

Once the primed faces are fully dry, run your hand over the surface to ensure it is fairly smooth. Very lightly sand any areas that may need some help (and then be sure to fully clear the dust before moving to the next step). I only did one coat of primer, but you may opt to do two, if you feel adhesion wasn’t great. Since I was going with a dark paint color, I wasn’t concerned about the brown lines in the insets being fully covered, more that primer was on the entire surface (even if a bit transparent). If I were painting the doors white, I likely would have done a second coat to ensure the primer was fully opaque.

Remember, the primer doesn’t have to look perfect, but the smoother/cleaner the surface, the better your paint will adhere. Here is one of my fully primed doors after it was dry.

The primed door on the floor drying.

How to Paint Thermofoil Cabinets

I knew I wanted to use Benjamin Moore Hale Navy on the cabinets because we’ve had such great luck using the color on other projects in our home. However, I wanted a smooth and slightly glossy finish. I chatted with a rep at our local Benjamin Moore store and he strongly recommended the BM Advance paint line. The paint has self-leveling features and has a slightly extended open time (meaning it doesn’t dry super fast which is great when you’re painting cabinets). I went with a semi-gloss finish. The rep also recommended the Picasso Latex/Oil brush for the smoothest finish.

I got to work. You’ll note that immediately after I brushed the paint on (moving in the same order I did for the primer), there are light brush strokes. However, if you lightly feather as you go along (don’t allow the paint to dry very long if you do this), the lines self-level! I realize the following picture is horrible, but I had to quickly snap it as soon as I had the paint on. This was my first door, and I was still getting the hang of the paint so it wasn’t perfect (but most of this did level out on it’s own). Remember, you can sand between coats of paint if you have any paint brush ridges!

My biggest piece of advice is this: If it’s been more than a few minutes, do not go back over any painted areas with your brush. This is when you’ll get ridges and brush marks that likely won’t go away. Move quickly and with a light hand!

Freshly painted door in a medium blue color drying under the Christmas tree.

I did the same process on the vanity frame as well. I was working with one light bulb dangling from the wall at this point.

Painting the rest of the cabinet in the bathroom.

Once the doors are fully dry, apply your second coat. I would highly recommend not re-hanging the doors for several days beyond the drying time recommended on the can. I know it’s tough to be patient, but you don’t want any areas to scratch or get chipped when you’re trying to get the doors back up. The extra time will be worth the wait!

Painted Thermofoil Cabinet Results

I couldn’t be happier with the results! I won’t say 100% that it looks like a factory finish, but I would say it’s 95% of the way there. And to be fair, I’m likely the only one that notices any flaws because most people don’t put their nose right up to cabinets at a 45 degree angle to inspect paint lines, right? 😉

I loved the paint line so much (and it’s self-leveling properties) that I’m using it now to paint all the trim in our office.

I absolutely love the soft velvety sheen of the paint!

Thermofoil painted cabinets with Benjamin Moore Hale Navy paint. After nearly eight months, the finish is just as good as the day I painted them! We use this powder bathroom daily (I even brush my teeth and do my make-up in here before I head out the door). We haven’t had any issues with chips, scratches, etc. so at this point, I think it is holding up really well!

So, do you think you’d try painting your own thermofoil cabinets? Have you had success doing so in the past? I’d love to hear!

If you would like to follow along on more of my home decor, DIY, lifestyle, travel and other posts, I’d love to have you follow me on any of the following:

Pinterest | Instagram | Facebook | Twitter

disclosure: some affiliate links used