Dream Cheeky will help you know How To Fix Outdoor Wicker Furniture 2022: Things To Know
Rattan and cane furniture are all the rage! If you’re lucky you can find some rattan furniture at a thrift store to makeover, but it might need some repair. So, here’s how to repair rattan furniture!
Get more repairing furniture ideas here!
PIN THIS TUTORIAL FOR LATER
Who doesn’t love rattan? It’s totally in right now!
The downside? It’s fragile stuff and repairs often look intimidating.
If you’re in the refinishing business, you probably know that boho beauties are selling like hot-cakes and at a high dollar price point.
Yet, oftentimes, the fix is fairly inexpensive and simple, just takes some patience.
I spotted this rattan shelf in a warehouse and immediately thought it resembled a $350 Urban Outfitter look-a-like I’ve had my eyes on.
While I am no basket weaving master – though there was an underwater basket weaving class offered at my college that I regret making fun of instead of enrolling in – I do have some simple techniques on how I repaired this wicker wonder in need of love.
As an Amazon Associate, I earn from qualifying purchases. I also may earn from other qualifying purchases with other companies or get free product to review and use. All opinions are my own.
What you’ll need:
- Dawn Dish Soap and Water
- Scrubbing Brush for thicker reed or a Toothbrush for finer
- A Coil of Reed Cane (measure your cane for exact measurements!)
- Sharp Scissors or Wire Cutters
- Wood Glue
- Small Clips or String (wood clips, chip clips, etc.)
- Spray Paint (optional, see below for exact paint used!)
How to Repair Rattan Furniture
- Scrub clean
- Clip off broken/damaged rattan
- Choose and soak
- Measure and cut
- Tuck and glue
- Finish with paint (optional)
Step One: Scrub clean
Using your soap and brush, give the rattan a good scrub.
For thinner, more fragile cane I would recommend a soft toothbrush.
The rattan on my shelf was pretty sturdy so I used a larger, scrubbing brush.
This will act as both a cleaning step, and in a way, a light sanding step to remove any previous residue or flaking rattan.
Step Two: Clip Off Broken/Damaged Rattan
Using your scissors or wire cutters, trim away any damaged or broken rattan. This will give you a clean slate for your new rattan.
*TIP: Take a picture before doing this so you can recall the patterns.
Step Three: Choose and Soak
Using the rattan that you trimmed away, measure the diameter to determine what millimeter size rattan you will need to replace it with.
There are flat and round types.
I purchased mine from Amazon, but basketweaving.com also has a lot of options.
Once your rattan is purchased, soak the coil in water for 20 minutes.
If you omit this step your rattan will be very stiff, brittle, and difficult to work with.
I used a large bowl of water and kept it nearby while working with the rattan to prevent it from drying out.
Step Four: Measure and Cut
Next, it’s time to measure and cut the rattan!
No rulers or measuring tape required.
Simply cut the starter end of the rattan at an angle so you can easily wedge it into the space of the previous rattan and estimate the length.
Allow for some extra tucking room on the other end and cut (if it’s too long you can trim it later).
Step Five: Tuck and Glue
Using your wood glue, simply dip each end of the rattan into the glue and tuck into the space you just measured.
Until the glue dries, you may need something to hold it in place and at the angle desired to keep the pattern consistent while the rattan and glue dry.
Wood clips or even string would work well, but in my case, I used IKEA chip clips. (Hey! Sometimes you have to get creative.)
Step Six: Paint (optional)
Once your glue is dry, remove the clips.
You can stop here if you love the look of the natural rattan.
Isn’t repairing rattan furniture easy!?
If your new rattan clashes with your existing rattan – which in my case, did because it was previously painted – you can apply spray paint.
Use any color of your choosing, but if you are aiming for a natural rattan look please refer to my how to refinish rattan post.
How I completed my look…
I completed my look by applying my custom blend spray paint lined out in my “how to refinish rattan furniture” post (linked in the paragraph above).
That’s it! This trendy little shelf was sold within 5 minutes on Facebook Market!!
PIN THIS TUTORIAL FOR LATER
This makeover was created by Jess with Oak and Grain Restoration. She currently lives in North Carolina where she works full-time in an emergency room. She loves dipping into her creative side by transforming furniture and in the process, keeping her sanity.
Follow her on Instagram to see more action behind the scenes!!