How to Replace Heating Element in Samsung dryer?[2022] (Solved!)

Your Samsung Dryer isn’t heating? Check Heating Element

When the electrical components in your dryer heating element fail, it can generate a lot of heating element terminals, which can be dangerous.

That’s why a thermal fuse is included with every dryer.

It’s a safety feature that will trip if the circuit is overloaded, preventing the circuit from closing and the dryer from heating up.

When the thermal fuse blows, you must troubleshoot your dryer to determine the root reason.

Once you’ve done that, you’ll be able to replace the thermal fuse.

Top 3 Things you Need to Repair your Samsung Dryer

1. Dryer Heating Element, Thermostat, and Thermal Fuse (Check for Best Price Here)
2. Digital Multimeter (Check Best Prices Here)
3. Portable Infrared Thermometer (Check Best Prices Here)

How to Fix Samsung Dryer Heating Element and Sensors Video?

Tools You will Need from the Video.

• Dryer Heating Element, Thermostat, and Thermal Fuse (Check for Best Price Here)
• Digital Multimeter (Check Best Prices Here)
• Portable Infrared Thermometer (Check Best Prices Here)
• Screw Driver Set
• Pliers Here

Top 5 Reasons Why your Samsung Dryer Isn’t Heating:

Every day, we throw our damp clothes into our dryers and turn them on without giving them a second thought.

Everyone expects that once the door is shut and the drying cycle is started, the machine will heat up and do its work.

But what if your Samsung dryer isn’t heating any more?

Important note:

A burnt drying heating element is the most common cause of a Samsung dryer not heating up, with a blown thermal cut-off fuse, cycling thermostat, or a broken control board heater relay accounting for the remaining 18%.

The final 2% was caused by a faulty power supply.

1. Heating Elements That Has Been Burned

What it Entails: To efficiently dry your clothing, your Samsung dryer must first generate heat.

This is when the heating element enters the picture.

The machine sends power to the heating element when it requires heat.

Heat is generated by the heating element, which is then forced into the dryer by a blower fan.

That hot, flowing air draws moisture out of your clothes and dries them in your Samsung dryer.

Why it Fails: When a Samsung dryer won’t heat up, it’s almost often due to a burned-out heating element.

You may check whether this is the case by visually inspecting the heating element on your Samsung dryer or using a multimeter.

When checking the resistance of the heating element using a multimeter, the measurement should be around 10 Ohms.

If this is the case, your Samsung heating element is in good operating condition.

Aside from that, get a flashlight and examine the entire heating element closely.

Burned-out elements emit a burnt odor and have burn marks running the length of the element.

• 6 Steps in Replacing Heating Element

To resolve this issue, you will need to replace the heating element.

Don’t worry, It’s not difficult to accomplish this!

Reaching the heating element housing, on the other hand, is what makes this a labor-intensive and time-consuming repair job.

1. To avoid harm and electrocution, always begin any repairs by turning off the dryer’s power supply.

2. Then, as a quick reference, keep your user handbook and technical sheet close by.

3. This will assist you in locating and identifying your model’s heating element, which will be housed somewhere along with the air vents.

4. To reach there, you may need to take off a few elements, including the dryer drum and any other obstructions.

5. However, after you’ve gotten to the housing, you’ll need to remove the present heating element and separate the electrical contacts that are connected to it.

6. Replace the replacement in the same manner, then work your way backwards by reinstalling any components or panels you removed previously.

2. Thermal Cut-Off Fuse That Has Been Burned

What it Entails: There’s an extra component that protects home appliances that create heat (like your stove or, in this case, your Samsung dryer) from overheating.

The thermal cut-off fuse is the name for this component.

Because they burn or blow out to safeguard the remainder of the appliance, they’re called sacrificial devices.

Why it Fails: When a Samsung dryer fails to heat up, there’s a 10% possibility it’s due to a burned thermal cut-off fuse in the heater element assembly.

As previously stated, this occurs when the temperature around the heater component increases above safe levels, causing the fuse to blow, protecting the rest of the machine from damage.

The vents in the dryer are usually clogged, resulting in overheating.

The heater overheats and the thermal cut-off fuse burns if there isn’t enough airflow to transfer heat away from the heating components.

How to Solve the Problem:

There are two components to resolving this issue.

To begin, replace the thermal cut-off fuse that has burned out.

These are ‘disposable’ parts because they cannot be fixed.

It is only possible to replace them!

• Before making any repairs, turn off the power supply as usual.
• Additionally, keep a copy of your user manual and technical sheet on hand for easy reference. That will serve as a guide when you remove the essential panels (usually the back panel) in order to gain access to the heater assembly.
• Another thing to keep in mind is that if the heater assembly is still hot, you should not work on it until it has completely cooled down.
• After that, remove the burned fuse and replace it with a new one.
• Replacing the fuse simply addresses the symptom, not the underlying problem. To guarantee appropriate ventilation and avoid overheating, clean out all of the dryer’s vents.

3. Thermostat Failed to Cycle

What it Entails: Until the completion of the drying cycle, your Samsung dryer heating element does not generate heat continually.

Instead, it merely produces heat until the target temperature is reached before turning off the heater.

When the temperature falls too low, it will restart the heating procedure as many times as necessary to keep the temperature at the proper level throughout the cycle.

Your dryer has a cycling thermostat to guarantee that the heater turns on and off only when necessary.

It detects whether temperatures are too low or too high and responds appropriately.

Why it Fails: The cycling thermostat is constantly in use and may eventually fail.

When this happens, the dryer may not recognize that the temperature inside is too low and fails to switch on the heater.

If you’ve had your Samsung dryer for a long time, the thermostat may have suffered from excessive wear and tear and is no longer functioning properly.

By examining the resistance of the cycling thermostat with your multimeter, you can diagnose it.

A working thermostat should read between 0.1 and 0.5 Ohms.

If it’s broken and needs to be changed, though, it’ll display an infinite reading.

How to Fix this Problem:

The cycling thermostat is usually located behind the dryer’s back panel.

That will vary depending on the model and its design, so check the user handbook and tech sheet to be sure.

• As always, disconnect the power supply before beginning any sort of work.
• To replace it, all you have to do is unscrew the electrical connector and the screws that hold it in place.
• Then screw in the replacement thermostat and work backward: screw it in, replace the connector, and then repair the back panel.

4. Heater Relay on Control Board Failed

What it Entails: The main control board, as you may know, is the ‘brain’ of practically every domestic device.

Even the one in your Samsung dryer coordinates and manages all of the appliance’s functions, including its heat-generating capability.

There are a lot of electrical components on that control board that governs different portions of the dryer.

We’re looking at the relay on that control board that’s responsible for giving electricity to the heater when it’s needed.

Why it Fails: The heating relay on the control board may be the part that fails, even if the rest of the control board is working properly.

Despite everything else working properly, the control board isn’t transmitting any electricity to the heater since the heater relay is broken.

How to Fix this Problem:

It is technically possible to repair only the damaged heating relay.

You might be able to discover a service that can do it for you depending on where you live.

The most straightforward approach, on the other hand, would be to replace the primary control board entirely.

The main control board for your dryer is normally hidden underneath the control panel.

To get to it, you might have to remove the top panel, however, this will depend on the model you have.

Always double-check the user manual and technical sheet for accuracy.

Remove the board’s electrical connectors and mounting screws after you’ve reached it.

Replace the old board and the screws and connectors in the same manner as before.

5. Insufficient Power Supply

What it Entails: A dryer uses a lot of energy, especially while the heating element is on.

The heating element within the dryer requires a continuous two-phase 240V power source to generate heat.

Why it Fails: Because the dryer uses a two-phase power source, it’s possible that it’s connected to two circuit breakers.

If one of those breakers goes, the dryer will receive only half the electricity it requires (120V) and from only one phase.

In layman’s terms, other sections of the dryer, such as the motor or control board, might get electricity and work properly.

The heating element, however, will not get power and so will not be able to generate any heat.

How to Fix this Problem:

• Restore full power to your Samsung dryer to fix this.
• Check your circuit breakers to see which ones are connected to your dryer.
• After that, make sure they’re both turned back on. If the same breaker keeps tripping, it’s a sign that your electrical system has a major problem.
• To solve the problem, you’ll need to contact a skilled electrician, as well as a dryer repair specialist if the issue is with the Samsung dryer itself.

Want to reset your Samsung dryer?

How to Reset Your Samsung Dryer?

When something goes wrong with your dryers, such as an error code or it won’t spin, start, or heat, you might believe a good reset is all it takes.

Strange electronic malfunctions (such as those that may occur after a power outage) may be cleared with this reset, but if the dryer does not restart, extra troubleshooting will be required.

However, depending on the error you receive, resetting at the first hint of problems isn’t always a good idea.

Read on to learn how to reset, when to do it and when not to, and what to do if it doesn’t work.

Restarting Your Dryer.

It’s simple to reset your dryer.

• Unplug it (or turn off the circuit breaker), wait a few minutes for the electrical charge in the dryer to dissipate (typically 1 to 5 minutes), and then plug it back in.

When Should you Reset your Samsung Dryer?

All fault codes in your dryer’s memory will be cleared if you reset it.

“Great, now my dryer will work again,” you may think, but it’s a little more involved than that.

To begin with, certain issues are caused by something you’ll need to address, and restarting the device isn’t a troubleshooting step.

If your dryer isn’t heating up properly, it could be due to a clogged vent.

A reset won’t clear your vent and won’t help you troubleshoot this problem, but a vent blockage test can help you figure out if it’s the source of the problem.

So, when should you perform a reset?

After you’ve gone through all of the troubleshooting steps.

However, certain problem codes have no solutions and the only thing you can do is try a reset.

(For a list of which error codes offer troubleshooting procedures and which don’t, see our error code guide, or our blinking lights guide for models without a digital display.)

You shouldn’t try to clear the code again if a reset doesn’t work (and you’ve tried all of the troubleshooting methods first).

Wiping the unit’s history of error codes makes it more difficult for a technician to diagnose and fix the problem.

You’ll have to make a service request.

At the end of each of our troubleshooting tutorials, you’ll find a link to request service.

How much does it cost to repair a Samsung dryer this 2021?

Dryer Repair Costs on the Average

The average cost of a dryer repair is $180.

On the low end, homeowners may spend $100, while on the high end, they may pay $430.

The following factors influence repair costs:

• Technicians who must go further or operate on a dryer in an awkward location will be charged extra.
• Type of repair. Some parts are more expensive to replace.
• Model and brand of dryer.
• Parts for newer versions are easier to get by than for earlier model

Cost of a Dryer Heating Element

You should budget at least $170 to $280 for a replacement heating element, including materials and labor.

For labor, an appliance technician usually costs between $80 and $100 per hour.

A one-time service fee is also included in this price.

The majority of technicians charge between $50 and $80 for their services.

Frequently Asked Questions

Why does the heating element in my Samsung dryer keep failing?

Assume you’ve replaced a burned-out dryer heating element with a new one that also burns out.

If this is the case, your dryer may be deficient inadequate airflow.

Remember that the dryer requires adequate airflow to avoid overheating its components, such as the heating element.

Many people fail to clean their dryer vents and filters on a regular basis.

Lint accumulates, as a result, obstructing the efficient passage of air.

Your dryer vents, no matter how clean you believe they are, could always use a good cleaning!

Is It Worth It To Replace A Dryer’s Heating Element?

Because replacing a dryer’s heating element can be expensive (depending on where you live, of course), some people opt to buy a new dryer instead.

So, which option should you take? Here’s a good rule of thumb: if the cost of fixing your existing dryer is 50% cheaper than the cost of a new dryer, you should repair it instead of buying a new one.

To put it another way, if the cost of repairs is more than half the cost of a new dryer, you might as well pay the difference and get a brand new one!

How Can You Tell If Your Dryer’s Heating Element Is Faulty?

The heating element can be visually inspected or tested with a multimeter.

Remove your heating element and inspect it under a light to make it easier.

You might be able to identify any cracks or burn marks in the coils just by glancing closely at the heating element.

Those are all indications that the heating element is defective.A multimeter can also be used to check for continuity and resistance.

By pressing the multimeter probes against the wire terminals of the heating element, you can do so.

If the heating element is still working properly, your meter should be.