- Dream Cheeky
Although the Xbox One is a very popular console for video games, there are sometimes problems with it. Sometimes it won’t turn on. The Xbox One does not have the same explicit external cues as the Xbox 360 with its Red Ring of Death. You need to think about the possible problems in order to eliminate them, especially if your device refuses to turn off or gives you an error code.
Keep reading to answer your question about why won’t my Xbox turn on and how to fix this problem.
- 1 Causes Why Won’t My Xbox Turn On
- 2 FAQs
- 3 Conclusion
Causes Why Won’t My Xbox Turn On
Check That Xbox One Controller Works Properly
You might be accustomed to turning the Xbox on using the controller. It is best to first rule out any problems with the peripheral.
- To check if the console turns on, press the Power button. It could be that your controller is not working if the console does not turn on as normal.
- To check if the controller turns on, press the Xbox button. If it doesn’t, your batteries may be dead and you will need to replace or recharge them.
- If your device is still not turning on, connect the controller to the Xbox and press the X button once more.
- If the above steps do not work, you can try another controller. If another controller is able to turn on the One you can replace it.
Read more: Why is my Xbox controller blinking?
Check Console Settings
We recommend that you check your console settings if your Xbox is able to open. You’ll be able to turn your device on easily in the future. The X button can be pressed on the controller to access the settings. Sometimes your Xbox settings can prevent your console’s proper operation.
You should check your power settings. Make sure the Instant-On setting has been turned off. You can speed up the start-up of the console, but it can sometimes make it more difficult to turn it on.
We recommend that you turn this setting on. Instead, you can power up the Energy Saving feature. You can also check the Auto-Shutdown setting. You will need to turn it off if this setting is enabled.
If your Xbox doesn’t activate, you will not be able to check the settings or use this method to repair it.
Vent Xbox One
It could have overheated if the One shuts down randomly while you are playing a game.
- Take out any obstructions to the Xbox One’s vents. Any obstruction to the console’s ventilation system could cause it to stop its internal airflow. This means that the hot air can’t escape from the console and it will shut down to stop heat damage to internal components.
- You can leave your console for a while to allow it to cool down. It is important to place it in an area that receives plenty of ventilation.
- After the console is cool, turn it on by pressing the Power button.
Make Sure You Have The HDMI Cable For Xbox Console
The HDMI cable could be the problem if the Xbox lights up but there is no display.
- Verify that the HDMI cable has been properly connected to the Xbox One as well as the TV. If the HDMI port on the TV does not turn on, you can try switching it.
- Try another HDMI cable to see if the One detects any display.
Make Sure Your Xbox One Has An Internal Power Supply
Power supply Problems can cause an Xbox One to become unresponsive.
- You must ensure that the power cable is securely inserted into the console’s back and that it is correctly connected to an AC outlet.
- Once everything is working properly, you can next test the power outlet by using a digital multimeter, or by simply connecting another electronic device to it and checking if it works.
Or You might try a different power outlet. Plug the console and power supply into a different outlet. Then, check if the console turns on. It’s possible that there is an electrical problem.
Turn off all other electrical devices in the room or house that aren’t functioning and then go to the circuit breaker or fuse box. Look for a switch that is flipped to the off position. Put it on and wait. If all else is working, there may be an outlet problem. Contact a licensed electrician.
The problem may lie in the motherboard if the power supply light comes on and your device does not turn on. You may need to replace your motherboard if it is.
Perform An Internal Power Reset
These steps will reset the power supply of the Xbox One X or S consoles.
- To perform a power reset, disconnect your power cable from the back of the console. Wait for ten seconds. Connect the cable and then press the X button at the front.
- When it turns on, you are all set.
The following steps can be used to reset the external power supply of the original Xbox One:
- Unplug all cables from the console and power supply, as well as the wall outlet.
- Wait ten seconds, then connect the power supply to your wall, and then connect the console to your power supply.
1. Why Is My Xbox One Not Turning On At All?
Problem with the power supply. As we mentioned in the post, the most common problem is with the power supply. Problems with the power supply are responsible for most console problems. You need to make sure your power strip or surge protector is working properly and plug your Xbox into another place. You may also need to reset the power supply.
Power Surge Your Xbox could be temporarily shut down by a power surge. To resolve this problem, you can simply turn on the device again. If it doesn’t activate, unplug the power cable and plug it back in.
External Damage. Your device might be damaged in the worst-case scenario. You might need to get them repaired or replaced if you drop them, spill water on them, or dropped them. It will then turn itself on again.
Xbox Live Issues. Users report seeing a black screen on their Xbox when they turn it on. Microsoft claims that the problem could be due to Xbox Live’s internal problems. Turn off your internet and reset the device if this happens. Microsoft offers a service number for those who have persistent problems.
2. How To Fix An Xbox One That Won’t Turn On But Beeps
These tips will help you fix your Xbox console that won’t turn off but still makes some sound. These are some simple, but powerful tips that will make the console turn on again.
Tip 1: Disconnect all devices
Your Xbox’s start-up could be hampered by plugged-in or remote devices. If your device isn’t working, unplug any devices connected to it. Once all devices have been unplugged, power up the device.
Tip 2: Press the Power Buttons, Sync, Eject and Sync simultaneously
You can also try pressing the power, sync, and eject buttons simultaneously. This will restart the Xbox and may help it turn on again. This could be a great option if it keeps stalling or freezing.
Tip 3: Insert a disc
You can also insert a hard disk into your Xbox to help. Inserting a disk into it could help power it on if it was in sleep mode.
There can be many reasons why your Xbox One might not turn on. Some of the more common reasons are a bad power cord, a faulty power brick, or a problem with the console itself. If you’ve tried all of the basic troubleshooting steps and your device still won’t switch on, then it’s likely that you’ll need to send it in for repair. Hope that you can find it helpful in this article.